EVERCROSS BOT
EVERCROSS BOT D1 PRO Wet and Dry Floor Washer, 15–20 kPa Suction, Standard/Power Modes, 180° Lay-Flat Cleaning, Self-Cleaning & Hot-Air Drying, Up to 45-Minute Runtime
EVERCROSS BOT D1 PRO Wet and Dry Floor Washer, 15–20 kPa Suction, Standard/Power Modes, 180° Lay-Flat Cleaning, Self-Cleaning & Hot-Air Drying, Up to 45-Minute Runtime
Couldn't load pickup availability
Wet & Dry Cleaning with 15–20 kPa Suction:
The 110 W brushless vacuum motor delivers 15–20 kPa suction. Paired with a 40 W brush motor and a 500 RPM roller brush, it picks up everyday dust, hair, debris and wet messes while washing the floor in a single pass.180° Lay-Flat Cleaning + Manual/Automatic Water Spray:
At just 14 cm high when laid flat, the cleaner reaches under beds, sofas and low cabinets. Choose manual or automatic spraying to suit your needs. If the dirty-water level gets too high during lay-flat cleaning, the machine will sound an alert and shut down automatically. Empty the tank promptly.
Self-Cleaning + Hot-Air Drying:
These functions help clean and dry the roller brush. During drying, the roller rotates intermittently so warm air reaches every side, reducing trapped moisture. After self-cleaning, promptly empty, rinse and dry the dirty-water tank. Regularly clean the roller, filter and suction inlet; allow washed parts to dry completely before reinstalling.
Two Cleaning Modes + Up to 45 Minutes Runtime:
Switch between Standard and Power modes based on floor conditions. The 4500 mAh battery provides approximately 45 minutes in Standard mode or 30 minutes in Power mode. Separate 680 mL clean-water and 450 mL dirty-water tanks keep fresh and waste water apart.
Anti-Tangle Design + Smart Feedback:
A serrated anti-tangle design helps reduce hair wrapping around the roller. A HEPA filter helps trap fine particles picked up during cleaning. An LED display and voice prompts in German, French, Italian, Spanish, English and Dutch make operating status easy to follow; the factory default is German.
Specifications
Model: D1 PRO
Color: White
Battery capacity: 4500 mAh
Charging time: 6 h
Roller speed: 500 RPM
Brushless suction: 15–20 kPa
Motor power: 110 W (vacuum/fan); 100 W (base); 40 W (brush)
Rated power: 250 W
Adapter output: DC 28 V / 1 A
Noise level: 73 dB
Two operating modes:
Standard: 45 min
Power: 30 min
Clean-water tank: 680 mL
Dirty-water tank: 450 mL
Features:
LED display:
Voice prompts: German, French, Italian, Spanish, English, Dutch (default: German)
Serrated anti-tangle design:
180° lay-flat cleaning:
Hot-air drying:
Water spray button: Press once to spray once; press and hold to enable/disable automatic spraying
Suction mode switch: Standard / Power
Self-cleaning button: While charging, press the spray button to start self-cleaning
Dimensions and weight:
Main unit: 218 × 270 × 1100 mm
Charging base: 315 × 313 × 90 mm
Package dimensions: 720 × 340 × 275 mm
Net weight: 4.15 kg
Gross weight: 7 kg
Package contents:
Main unit: ×1
Self-cleaning base: ×1
Soft-bristle roller: ×1 (pre-installed)
Charger (adapter): ×1
HEPA filters: ×2 (1 pre-installed)
Water tank cleaning brush: ×1
User manual: ×1
Quick start guide: ×1
Important:
1. For indoor household floors only. Do not use outdoors or in commercial or industrial environments.
2. Fill the clean-water tank with room-temperature water only. Do not add detergent, disinfectant, hot water or essential oils, as excessive foam may block internal pipes and damage the appliance.

Video
Question & Answer
How to connect the U8 pool robot to the APP?
We recommend performing a forced unbinding operation before placing the robot in the water, and then attempting to reconnect to the network. The specific steps are as follows:
1.Connect the charger and power on the device.
2.Key operation: Within 10 seconds after powering on, press and hold the power button for about 3 seconds. A successful operation will be indicated by a buzzer sound + all LEDs flashing simultaneously.
3.You can now reopen the APP to add the device.
If you have any further questions, please feel free to contact us.
How do I switch cleaning modes on the U8 pool robot?
Please first turn on the pool robot, then press the power button briefly to cycle through the four cleaning modes: Smart Path Planning, Floor Mode, Wall Mode, and Waterline Mode. If you have any further questions, feel free to contact us.
Can the U8 pool robot clean the water surface?
This pool robot is designed to clean the pool floor, walls, and waterline, but it currently does not support cleaning the water surface. If you have any further questions, feel free to contact us.